Table of Contents
Advertisement
2.8
TELGUARD SETUP PROGRAMMING PARAMETERS
The Telguard will not operate until the unit is activated from the Telular Communication Center.
Certain Telguard operating parameters may need to be changed from the factory default programming by the
installer during installation in order to have the Communication Center process alarm signals to the central
station. These setting include the STC supervisory trip input settings, CFC settings, NSC trip delay time, and
standby battery size. The Communication Center responds with a radio acknowledgement to the Telguard
clearing the STC condition and allowing the Telguard to operate over the cellular radio network. The
programmed parameters are transmitted automatically to the Telular Communication Center when the
Telguard is activated.
2.9
UL LISTINGS
Model TG1G0001 meets the requirements for all Household Burglary, Household Fire, and Combined
Household Burglary/Fire installations. TG1G0001 has a plastic enclosure and dipole antenna. TG1G0001 is
UL Listed for the following:
•
UL Household Burglary
•
UL Household Fire
•
UL Household Burg/Fire Combination
3.0
GETTING READY
The Telguard can only be activated when all the necessary accounting information has been entered into the
customer database located at the Telular Communication Center. The database includes information about
the customer account, unit location, and system test plan information.
3.1
D
EALER
Prior to activation of any Telguard unit, a Dealer Account must be established. Once the Dealer Account has
been established and service credit line established between the Security Dealer and Telular, a Cellular
Service Activation form may be submitted. Establish your Dealer Account by completing the Telular Cellular
Service Dealer Account Application that is included with every Telguard and faxing it to Telular Customer
Service at 678-945-1651. Once the application has been completed you will receive an acknowledgment
within 1 business day or sooner. This is a one-time event; the acknowledgment from the Telular Customer
Service will include a Dealer Account Number that will be used for all Telguard Digital activations.
3.2
S
UBSCRIBER
Activate Telguard prior to leaving for the job site. Activation of the Telguard can be accomplished by
either of the two following methods:
1. FAX - Fax the completed Telular Cellular Service Activation Form that is shipped with each Telguard
to Telular Customer Service at 678-945-1651.
2. INTERNET - Complete the Activation Form online at
Within 30 minutes of receipt of the activation request, the subscriber record will be created and billing of
service will commence. Telular Customer Service is open from 8:00 AM – 8:00 PM EST Monday – Friday,
9:00 AM – 1:00 PM EST Saturday and closed during major holidays; Activation requests received after hours
will be processed by 9:00 AM EST the next business day.
56034002 1/9/2006
A
E
CCOUNT
STABLISHMENT
A
A
CCOUNT
CTIVATION
5
www.Telguard.com
© 2006 Telular Corporation
Advertisement
Table of Contents
