Related Manuals for Telular SX6P
Summary of Contents for Telular SX6P
- Page 1 SX6P ® HONECELL CDMA2000 1X • Fixed Wireless Phone 800 MH CDMA 1900 MH CDMA ANUAL 08/18/04 Part Number 56031601...
-
Page 2: Quick Connection Guide
QUICK CONNECTION GUIDE Spike Antenna Fixed Wireless Phone This manual is for use with all SX6P-200C and SX6P-300C series deskphones only. To determine which model of phone you have, pick up the phone and view the label underneath for verification. -
Page 3: Phone Settings
SX6P MENU STRUCTURE Menu Phonecell SX6P CDMA ® Phonebook View Edit Erase Time/Alarm Alarm Time Format Date Format Phone Settings Banner My Phone Number DTMF Length Key Volume Auto Send Delay Freq. Dial Number Language Dial Tone Type LCD Control... -
Page 4: List Of Components
TERMS AND CONDITIONS FOR USE OF PHONECELL These Terms and Conditions are a legal contract between you and Telular Corporation for the title to and use of the Product. BY RETAINING AND USING THE PRODUCT AFTER RECEIPT OF IT, YOU AGREE TO THE TERMS AND CONDITIONS INCLUDING WARRANTY DISCLAIMERS, LIMITATIONS OF LIABILITY AND INDEMNIFICATION PROVISIONS BELOW. -
Page 5: Table Of Contents
Install Batteries ...1 Battery Operation...2 Location and Setup...2 Connect the Handset ...2 Wall Mounting ...3 Connect the SX6P to AC Power ...4 RUIM Usage ...5 GETTING TO KNOW YOUR SX6 ...6 Function Keys ...6 LCD Screen Icons...7 Service Indication ...7 CALL FUNCTIONS ...8... - Page 6 SW Version Information ...19 BONDING A SX6 TO A RUIM...20 WINDOWS XP/WINDOWS 2000 SETUP ...21 SENDING/RECEIVING A PC FAX ...27 SENDING/RECEIVING 1X DATA...28 SENDING/RECEIVING CIRCUIT SWITCHED DATA ...29 SX6P TROUBLESHOOTING ...30 CONFORMANCE STATEMENTS ...31 SAFETY INFORMATION ...31 WARRANTY ...33 Phonecell SX6P CDMA ®...
-
Page 7: Sx6P Setup
RUIM Card Installation (RUIM Model Only) Consult your service provider to determine if your unit is a RUIM model. If so, your SX6P will only be able to make emergency calls until you install a RUIM card. It will not receive calls or allow non-emergency outgoing calls. -
Page 8: Battery Operation
Battery Operation The SX6P will recharge its battery pack when connected to AC power. If AC power is interrupted, the SX6P will continue to operate, using power from the battery. Location and Setup The SX6P comes with a standard spike antenna (TNC). -
Page 9: Wall Mounting
3. Install the screws (not supplied) into the wall, leaving a gap of approximately 3 mm (1/8 inches) between the screw head and the wall. 4. Align the mounting holes with the screws and mount the SX6P onto the screws - see Figures 10 and 11. -
Page 10: Connect The Sx6P To Ac Power
4. Check the cellular signal strength and move the unit until the best signal possible is achieved - see the Service Indication section of this manual. Wall Socket Phonecell SX6P CDMA ® Figure 12 – SX6P AC power connection. AC Power Barrel Input Connector AC Power Cord... -
Page 11: Ruim Usage
Once a RUIM-using SX6P is operating normally, you can use it to set its RUIM to require a PIN, not require a PIN, or change the existing PIN. See Security (page 20) for details. -
Page 12: Getting To Know Your Sx6
GETTING TO KNOW YOUR SX6 Function Keys Operation of the SX6P is accomplished through the function keys on the keypad of the unit - see Figure 13. Message - To access voicemail or to send an SMS (text message) Menu - Used to access phone settings and features. -
Page 13: Lcd Screen Icons
The more bars, the stronger the signal. Figure 14 – SX6P LCD screen icons. Service Indication Full Service When powered on, the banner and current date and time will display. If service is available, the antenna icon will display indicator bars. -
Page 14: Call Functions
Receive a Call When Caller ID is Activated The Caller ID feature displays the caller’s number when the SX6P rings. If the caller’s name and number are stored together in the SX6P phonebook, the caller’s name and number will be dis- played. -
Page 15: Voicemail Access
2. Select 4: Delete Messages. 3. Use the up and down arrows to select whether you would like to delete all messages, then Press STO. NOTE: that individual messages can be deleted from the "Read Messages" option. Phonecell SX6P CDMA ® User Manual... -
Page 16: Message Lock
LCD but there is no alert tone. 1. Press MSG 2. Select 5: Message Options 3. Select 2: Message Alert Select the desired option using the up/down arrows and Press STO to save. Phonecell SX6P CDMA ® User Manual... -
Page 17: Phone Book
PHONE BOOK The SX6P can be programmed to store frequently called numbers via an electronic phone book. The SX6P phone book can hold up to 99 entries. Speed Dial by Location A phone book entry can be speed dialed as follows: For entries 1-9, lift the handset and hold down the location number until it dials.For entries 10-99, lift the handset, press the first digit and... -
Page 18: Edit A Phone Book Entry
2. Name - enter in the characters to search for and Press STO to search. 3. Location - enter the 2-digit location 01 through 99 CALL LOGS The SX6P saves a log of the last 10 missed, outgoing, and incoming calls. View Missed Calls 1. Start by pressing MENU 2. -
Page 19: View Outgoing Calls
3. Select 6: Air Time This displays the total airtime that the phone has used since the last time it was cleared. This is a calculation performed by the phone and may be different than the network's calculation. Phonecell SX6P CDMA ® User Manual... -
Page 20: Clear Air Time
This option will clear the phone's memory of how much airtime has been used. TIME / ALARM The SX6P allows you to set an alarm clock that can be used one time or for every day. Alarm 1. Start by pressing MENU 2. -
Page 21: Ring / Alert
RING / ALERT The SX6P is capable of supporting multiple ring tones and types of alerts. To adjust these settings, follow these instructions. Ring Tone 1. Start by pressing MENU 2. Select 4: Ring/Alert 3. Select 1: Ring Tone 4. Use the up / down arrows to select the desired ring tone and Press STO to save. -
Page 22: Phone Settings
This feature may be enabled or disabled. 1. Start by pressing MENU. 2. Select 5: Phone Settings. 3. Select 6: Freq Dial Num. 4. Select the desired setting and Press STO to save. Phonecell SX6P CDMA ® User Manual... -
Page 23: Change Language Displayed On Lcd
Change Language Displayed On LCD The SX6P is capable of displaying multiple languages on the LCD screen. 1. Start by pressing MENU. 2. Select 5: Phone Settings. 3. Select 7: Language. 4. Select the desired setting and Press STO to save. -
Page 24: Self Test Cycle
1. Start by pressing MENU. 2. Select 7: Security. 3. Enter the current lock code. 4. Select 3: Voice Privacy. 5. Select the desired option and Press STO to save. Phonecell SX6P CDMA ® User Manual... -
Page 25: Ruim Chv1 (Ruim Models Only)
RUIM CHV1 (RUIM Models Only) If your SX6P requires an RUIM, this setting allows you to enable, disable or change its PIN, also called the CHV1 (Card Holder Verification 1). This menu option is not available if your SX6P is bonded to a RUIM. -
Page 26: Bonding A Sx6 To A Ruim
BONDING A SX6 TO A RUIM You can bond a SX6P to the RUIM inserted in it. Once a SX6P has been bonded to a RUIM, the SX6P will not operate normally with any other RUIM installed in it. It will reject incoming calls and permit only emergency outgoing calls. -
Page 27: Windows Xp/Windows 2000 Setup
1. Connect your computer and the SX6P with a serial (RS-232) or USB cable, depending on your phone model. 2. If you are using a USB cable, install the Telular USB drivers from the included CD. 3. Set the SX6’s baud rate (MENU > 6: Data Settings > 1: Baud Rate) to 115200 (19200 when faxing) 4. - Page 28 6. Click on "Don't detect my modem, I will select it from a list". 7. Select "Standard 19200 bps Modem". Phonecell SX6P CDMA User Manual ®...
- Page 29 8. Select the COM port to use (if a COM port does not display, all COM ports are currently allocated). 9. Click Finish. Phonecell SX6P CDMA User Manual ®...
- Page 30 10. Configure the SX6P modem interface using the Start -> Settings -> Control Panel -> Phone and Modem Options" -> Modems Tab 11. Select the 19200 bps Modem -> Click on Properties 12. Select the Modem tab. 13. Change the Maximum port speed to 115200 (19200 when faxing) and click OK.
- Page 31 14. Configure the USB or Serial port using the Control Panel -> System ->Hardware -> Device Manager -> Ports Tab 15. Select the port used for the SX6P and right click on it. Select "Properties" from the resulting pop-up menu.
- Page 32 18. You may now proceed for transferring data and faxes by following the instructions in this manual. See Sending/Receiving a PC Fax (page 31), Sending/Receiving 1X Data (page 32) or Sending/Receiving Circuit Switched Data (page 33) for details. Phonecell SX6P CDMA ® User Manual...
-
Page 33: Sending/Receiving A Pc Fax
4. Select Fax Next Call or Fax Only and Press STO to save. If Fax Only is selected, your SX6P will treat all incoming calls as if they were Class 2 faxes. To return your SX6P to normal operation, choose Voice Always from the RX Data Mode Menu. -
Page 34: Sending/Receiving 1X Data
To send or receive circuit switched data, you need to set the port and modem speeds your computer uses for the SX6P to 115200 bps. See Windows XP/2000 Setup (pages 24 & 26) for details. This is the communication speed between the computer and SX6P; data transfer rates will be much slower. -
Page 35: Sending/Receiving Circuit Switched Data
4. Select Data Next Call or Data Only and Press STO to save. If Data Only is selected, your SX6P will treat all incoming calls as if they were CSD. To return your SX6P to normal operation, choose Voice Always from the RX Data Mode Menu. -
Page 36: Sx6P Troubleshooting
· Is the handset on the cradle? If not, place the handset on the cradle and try again. · Is the SX6P making a loud repetitive tone (ROH)? Then either speakerphone or the handset is off hook. Hang-up and try again. -
Page 37: Conformance Statements
824 MHz to 894 MHz and / or 1850 MHz to 1910 MHz. When you use the SX6P, the cellular system handling your call controls the power level at which the unit transmits. Exposure to RF (Radio Frequency) Energy... -
Page 38: Potentially Explosive Atmospheres
Potentially Explosive Atmospheres Turn your Phonecell ® SX6P OFF when in any area with a potentially explosive atmosphere. It is rare, but your Phonecell could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include fueling areas such as gas stations;... -
Page 39: Warranty
(15) months from date of shipment from Telular. Telular, at its option, shall at no charge either repair, replace or refund the purchase price of the Product during the warranty period, provided it is returned by Buyer in accordance with the terms of this warranty to the Telular designated repair center. - Page 40 LONG AN IMPLIED WARRANTY LASTS. VI. SOFTWARE PROVISIONS: Laws in the United States and other countries preserve for Telular certain exclusive rights for copyrighted Telular software such as the exclusive rights to reproduce in copies and distribute copies of such Telular software. Telular software may be copied into, used in and redistributed with only the Product associated with such Telular software.
- Page 41 Phonecell SX6 CDMA User Manual ®...
- Page 42 Phonecell SX6 CDMA User Manual ®...
- Page 43 Phonecell SX6 CDMA User Manual ®...
- Page 44 647 North Lakeview Parkway Vernon Hills, Illinois 60061, USA Tel: 847-247-9400 • Fax: 847-247-0021 E-mail: support@telular.com http://www.telular.com ©2004 Telular Corporation, all rights reserved. Part Number 56031601...
Need help?
Do you have a question about the SX6P and is the answer not in the manual?
Questions and answers