Advertisement
Quick Links
www.norix.com ● TEL 800 234-4900
Assembly Notes:
Norix is not responsible for any damage due to improper installation. If your shipment does not match the parts list, please contact Norix Customer Service at 800-234-4900.
Norix reserves the right to modify design specifications at any time without an obligation to owners of previously sold products.
___________________________________________________________________________________________________________________________________________________________________________________________________
Important Note: For a successful installation, careful and accurate
layout of the restraint brackets is a must. Read through the
instructions first and familiarize yourself with all of the steps. If you
have any questions, please call Norix Customer Care before
proceeding. Norix is not responsible for damage to components
due to improper installation.
Restraint hardware: Please familiarize yourself with the Restraint Kit components as shown below.
If any components are missing, contact Norix Customer Care before proceeding.
Restraint Ring Bracket (6)
011-057
Restraint Ring Pin,
Push Lock 002-017 (6)
Key 029-162 (4)
3/8" Drill Bit (1)
029-947
Rev. F - 1/12/21
091-991
Prodigy Restraint Ring Kit
Assembly Instructions
Model Number
PRD-RR06K
Drill Guide, Restraint (1)
Attenda, Restraint Ring Spacer
For Push-Lock Pin, Stainless Steel,
Removable
002-019 (6)
Screw, 1/4-20 X 3/4" L,
BH (12)
021-070
Patents Pending
011-064
Threaded Insert (12)
029-943
Tools Needed
Low RPM Variable Speed Drill
6mm Hex Driver
Pin-in-Torx® Driver T-27
5/16" Hex Driver
Restraint Ring, Sq. Bottom (6)
029-942
3/4" Drill Bit (1)
029-946
Screw, Sheet Metal,
#12-11 X 1.5 L,
Ext. Hex, Slotted (12)
021-203
Page 1 of 5
Advertisement
Related Manuals for norix PRD-RR06K
Summary of Contents for norix PRD-RR06K
- Page 1 Assembly Notes: Norix is not responsible for any damage due to improper installation. If your shipment does not match the parts list, please contact Norix Customer Service at 800-234-4900. Norix reserves the right to modify design specifications at any time without an obligation to owners of previously sold products.
- Page 2 Restraint location (6) per side 1. Determine desired locations for Restraint Rings. Any of the six locations on each side can be used. 2. Drill Holes for Brackets To drill the holes and install brackets, it is easiest if the Bed is on its side.
- Page 3 5. Install 2nd threaded insert Place a Restraint Bracket in its final position and loosely install a 1/4-20 screw into the insert to hold the Bracket in place temporarily. Install Restraint Ring & Pin Install a Restraint Ring and Restraint Ring Pin into the Bracket.
- Page 4 6. Install Brackets Insert the Bracket into the drilled hole in the Bed. Install the Restraint Ring & Pin into the Bracket. If there is play in the bracket, push it toward the outside of the bed while installing the (2) 1/4-20 Screws.
- Page 5 Removable Restraint Ring Function Locking After the Restraint Ring Pin and Ring are assembled to the Bed, push the Button on the Pin to lock. Unlocking and removal Hold onto the Pin while turning the key to prevent the Pin from turning.