Mounting A Fitting Cover - OBO Bettermann MKS 310 FS Mounting Instructions

Mounting
5 8 3
60 | EN
Or:
1
Fig 77: Riveting the turn buckle
4. Rivet the turn buckle on the underside of the cover with the turn
buckle button.
1
2
Fig 78: Mounting the cover with Helix turn buckle
5. Mount at least 3 x 2 turn buckles for each 3,000 mm of cover length.
6. Position the cover on the cable tray.
7. Lock the turn buckle button on the cable tray using a screwdriver.

Mounting a fitting cover

The fittings are supplied with pre-mounted turn buckles. The mounting
is the same as the mounting of the cable tray cover, see "5.8.2 Mounting
the cover with turn buckle" on page 59.
DRL H FT
2x
2
2x
2x
0 0
3 0
3
OBO Bettermann