Mounting Barrier Strips; Creating Equipotential Bonding - OBO Bettermann MKS 310 FS Mounting Instructions

Mounting
5 6
5 7
Note!
56 | EN

Mounting barrier strips

Barrier strips are used to route and separate cables with different func-
tions or voltages in a cable tray. Barrier strips are mounted in the cable
tray with FRS M6 truss-head bolts and combination nuts.
Fig 70: Mounting barrier strips
1. With unperforated cable trays, pre-drill mounting perforations.
2. Screw on the barrier strip.

Creating equipotential bonding

We recommend including the screw-on cable tray system in the equi-
potential bonding.
The equipotential bonding is created using an earthing clamp.
Fig 71: Mounting the earthing terminal
1. Drill a hole in the cable tray rail, if it does not yet exist.
2. Screw the earthing terminal on the cable tray rail with an FRSB 6x12
screw.
3. Electrically connect the earthing terminal to the overall equipotential
bonding.
OBO Bettermann