Cutting The Cable Tray - OBO Bettermann MKS 310 FS Mounting Instructions

Mounting
5 1

Cutting the cable tray

Cut the cable ladders according to the local circumstances.
Risk of cutting!
CAUTION
During cutting work, metal chips or sharp cut edges can cause injuries to
eyes and hands!
- Wear protective glasses and gloves.
- Deburr cut edges.
1. Cut cable trays to the desired length, e.g. using an angle grinder.
2. Deburr cut edges.
Note! In the case of cable trays for use outdoors, the corrosion protection at
the cut edges must be renewed with zinc spray after cutting,
e.g. type ZSF zinc touch-up spray, item no. 2362970 or type ZABF zinc
touch-up paint, item no. 2362979.
Screw-on cable tray systems 21 | EN