Mounting A Cross-Over - OBO Bettermann MKS 310 FS Mounting Instructions

Mounting
5 5 7
48 | EN

Mounting a cross-over

Cross-overs are mounted to create branches in all directions. Depend-
ing on their width, cross-overs are available with or without WKV angle
connectors.
With connector, 100–300 mm cable tray width
1. Mount the WKV angle connector at the cross-over.
Fig 56: Cross-over with WKV angle connectors
Fig 57: Pushing cable trays onto the cross-over
2. Push the cable trays onto the cross-over. The straps of the WKV
angle connector are on the inner side of the cable tray rails.
OBO Bettermann