Mounting Wkv Angle Connections On A Fitting - OBO Bettermann MKS 310 FS Mounting Instructions

Mounting
5 5 2

Mounting WKV angle connections on a fitting

The supplied angle connectors must first be mounted on the fitting with
the supplied FRS M6 truss-head bolts and combination nuts. The WKV
angle connector is mounted in the same way on all fittings with a width of
100–300 mm.
Fig 37: WKV angle connector and fitting
1 2
Fig 38: Mounting WKV angle connectors on a fitting
1. Push the strap under the fitting.
2. Screw the strap to the fitting.
Screw-on cable tray systems 37 | EN