Creating An Angled Connection - OBO Bettermann MKS 310 FS Mounting Instructions

Mounting
5 4 2
28 | EN

Creating an angled connection

Angled connection with RWVL straight and angle connector
The RWVL straight and angle connector is used with the cable tray
heights 35 and 60 mm. The connector is screwed on with FRS M6 truss-
head bolts and combination nuts.
Fig 23: Cutting the cable trays to create angles
1. Measure the angle and draw it onto the cable trays accordingly.
2. Cut the cable trays with an angle grinder.
Fig 24: Bend the RWVL straight and angle connector
3. Bend the angle connector to the desired angle.
OBO Bettermann