Procedure; Figure 10 Cell Supported By Stand - Fluke 9116A User Manual

♦
♦
♦
♦
• Quartz rod
• Cotton gloves
• Paper towels
• Stand to support cell
• Cell installation/removal tool
8.3

Procedure

1. Remove cell from packaging and place in stand or support it in a vertical
position.

Figure 10 Cell supported by stand.

Circular 2.54 cm (1 in) thick for below cell in basket
Circular 0.64 cm (0.25 in) thick with hole in center for over the cell
12.7 cm x 5.72 cm x 0.004 cm (5 in x 2.25 in x 0.016 in) fiber ceramic
paper for cushioning around cell
0.64 cm (0.25 in) diameter piece to be placed in the re-entrant well of
the cell
8 Fixed Point Cell Installation Instructions
Procedure
49