Table - Fluke 9116A User Manual

Table 3. Digital Interface Command Summary
Command Description
Display Temperature
Read current set-point
Set current set-point to n
Read scan function
Set scan function:
Turn scan function on
Turn scan function off
Read scan rate
Set scan rate to n degrees per
minute
Read temperature
Secondary Menu
Read proportional band setting
Set proportional band to n
Read cutout setting
Set cutout setting:
Set cutout to n degrees
Reset cutout now
Read heater power
(duty cycle)
Ramp and Soak Menu
Read number of programmable
set-points
Set number of programmable
set-points to n
Read programmable set-point
number n
Set programmable set-point num-
ber n to n
Read program set-point soak
time
Set program set-point soak time
to n minutes
Read program control mode
Command Command
Format Example
s[etpoint] s
s[etpoint]=n s=450
sc[an] sc
sc[an]=on/of[f]
sc[an]=on sc=on
sc[an]=of[f] sc-of
sr[ate] sr
sr[ate]= n sr=5
t[emperature] t
pr[op-band] pr
pr[op-band]=n pr=8.83
c[utout] c
c[utout]=n/r[eset]
c[utout]=n c=500
c[utout]=r[eset] c=r
po[wer] po
pn pn
pn= n pn=4
ps n
ps3
ps n = n ps3=50
pt pt
pt= n pt=5
pc pc
7 Digital Communication Interface
Returned
Returned Example
set: 9999.99 {C or F} set: 150.00 C
scan: {ON or OFF} scan: ON
srat: 999.99 {C or F}/min srat: 10.0 C/min
t: 9999.99 {C or F} t: 55.69 C
pb: 999.9 pr: 15.9
c: 9999 {C or F} c: 620 C, in
p%: 9999 po: 1
pn: 9 pn: 2
ps n : 9999.99 {C or F}
ps1: 50.00 C
ti: 999 ti: 5
prog: {OFF or ON} prog: OFF
Interface Commands
Acceptable
Values
Instrument
Range
ON or OFF
.1 to 100°C
Depends on
Configuration
Temperature
Range
1 to 8
1 to 8, Instru-
ment Range
0 to 500
43