Fluke 9116A User Manual page 49

Digital Interface Command Summary continued
Command Description
Set serial sampling setting to n
seconds
Set serial duplex mode:
Set serial duplex mode to full
Set serial duplex mode to half
Set serial linefeed mode:
Set serial linefeed mode to on
Set serial linefeed mode to off
Calibration Menu (WARNING – changing the following calibration values may change the accuracy of the instrument.)
Read C0 calibration parameter
Set C0 calibration parameter to n *c0=n
Read CG calibration parameter
Set CG calibration parameter to n
These commands are only used for factory testing.
Read software cutout mode
Set software cutout mode:
Set software cutout mode on
Set software cutout mode off
Miscellaneous (not on menus)
Read firmware version number
Read structure of all commands
Legend:
Note:
Command Command
Format Example
sa[mple]= n sa=0
du[plex]=f[ull]/h[alf]
du[plex]=f[ull] du=f
du[plex]=h[alf] du=h
lf[eed]=on/of[f]
lf[eed]=on lf=on
lf[eed]=of[f] lf=of
*c0 *c0
*c0=0
*cg *cg
*cg=n *cg=406.25
*sco *sco
*sco=ON/OF[F]
*sco=ON *sco=on
*sco=OF[F] *sco=off
*ver[sion] *ver
h[elp] h
[] Optional Command data
/ Alternate characters or data
{} Returns either information
n Numeric data supplied by user–may be entered in decimal or exponential notation
9 Numeric data returned to user
x Character data returned to user
When DUPLEX is set to FULL and a command is sent to READ, the command is returned followed by a
carriage return and linefeed. Then the value is returned as indicated in the RETURNED column.
7 Digital Communication Interface
Returned
Returned Example
c0: 9 c0: 0
cg: 999.99 cg: 406.25
sco: {ON or OFF} sco: ON
ver.9999,9.99 ver.9123,3.54
list of commands
Interface Commands
Acceptable
Values
0 to 4000
FULL or HALF
ON or OFF
–999.9 to 999.9
–999.9 to 999.9
ON or OFF
45