Table of Contents
Advertisement
Measurement Value
Charge
Voltage
Measure Mode
(Auto or Manual)
Figure 2-6: Measurement Results Display with Value
PASS/FAIL
Operation
Measurement Parameter
(Resistance or Current)
RESISTANCE
1.000M
MEASURE
VOLTAGE = 1000
MODE = AUTO
REMOTE
Keypad Disabled
(can indicate REMOTE
or LOCKOUT)
Results Displayed in the "Result Format"
(Scientific or Engineering)
9.0 e +005 ohms
MEASURE
VOLTAGE 1000
MODE AUTO
REMOTE
Figure 2-7: PASS/FAIL Results Display
Measurement Units
(Engineering or Scientific)
LIMIT = 9.0 e +005
RANGE = 10 uA (A)
Fullscale Measurement Range
(A) denotes autorange
LIMIT 9.0 e +005
RANGE 10uA
Test Cycle Status
(Charge, Dwell,
Measure or Discharge)
Pass/Fail Limit
Page 35 of 87
Advertisement
Table of Contents
