Canon L240 User Manual page 164

Messsage
HK SUBADDR/PSWD
LEAR PAPER JAM
DO . TOO LONG
E M RX
E M TX
LOAD PAPER
MEMORY FULL
13-10 Troubleshooting
Error Code Cause
#083/12 You attempted to send a
document or poll another
fax machine with the
incorrect subaddress and/or
password.
— There is a paper jam.
#003 The document is longer
than 1 metre.
— The unit is receiving a fax
using Error Correction
Mode (ECM).
— The unit is sending a fax
using Error Correction
Mode (ECM).
— The multi-purpose tray is
empty.
#037 The unit's memory is full
because it has received too
many documents, or a very
long or detailed document.
The unit's memory is full
because you tried to send or
copy too many pages at
once, or a very long or
detailed document.
Action
Contact the other party to check their
settings. Change your settings if
necessary ( pp. 6-3, 6-8, 9-10).
Clear the paper jam ( p. 13-3), then
reload paper in the multi-purpose tray
( p. 2-16).
Use a copier to make a reduced copy
of the document and then send the
copy.
Receiving with ECM may take longer
than normal receptions. Turn off
ECM if you need to receive quickly,
or if you know your local lines are in
CM RX
good condition (
Sending with ECM may take longer
than normal transmissions. Turn off
ECM if you need to transmit quickly,
or if you know your local lines are in
CM TX
good condition (
Load paper in the multi-purpose tray
( p. 2-16), then press Stop.
Print any documents stored in
memory ( p. 9-6). Then start again.
Divide the document and send or
copy each part separately. To free up
space in the unit's memory, print,
send, or delete any documents in
memory you no longer need
( p. 9-5).
, p. 14-7).
, p. 14-6).
Chapter 13