User Settings Menu - Canon L240 User Manual

USER SETTINGS Menu

For details on accessing the settings below, see p. 14-3.
The selectable settings and the default settings vary depending on the country where you have
purchased the FAX. The values shown here are average values.
Setting
ATE & TIME
UNIT TELEPHONE #
UNIT NAME
TX TERMINAL I
TTI POSITION
TELEPHONE # MARK
SCAN CONTRAST
OFFHOOK ALARM
VOLUME CONTROL
CALLING VOLUME
KEYPA VOLUME
ALARM VOLUME
LINE MONITOR VOL
RX CALL LEVEL
TEL LINE TYPE
R-KEY SETTING
14-4 Summary of Settings
Description
Sets the current date and time (
Enters the fax/telephone number you want to appear at the
top of each fax page you send (
Enters the name or company name you want to appear at
the top of each fax page you send (
Enables/disables printing of the sender information
( p. 3-5).
Selects whether the sender information is positioned
inside or outside the image area (
Selects the prefix for the unit number (
Selects the scanning contrast (
Enables/disables the off hook alarm that alerts you that
the handset is not seated properly in its cradle.
Sets the volume of the FAX sounds.
Selects the ring volume when the FAX detects a voice
call.
Selects the keypad touch beep volume.
Selects the error alarm volume.
Selects the line monitor volume (sound during dialling).
Selects the ring type for incoming calls.
Selects the telephone line type setting for your FAX
( p. 3-8).
Enables dialling through a switchboard.
If you select PBX, you can select additional sub-settings
( p. 3-9).
p. 3-6).
p. 3-6).
p. 3-6).
p. 3-5).
p. 3-5).
p. 7-3).
Sub-Settings
–
–
–
ON
OFF
OUTSI E IMAGE
INSI E IMAGE
FAX
TEL
STAN AR
ARKER
LIGHTER
ON
OFF
–
1/2/3
0 (off)/1/2/3
0 (off)/1/2/3
0 (off)/1/2/3
HIGH
STAN AR
TOUCH TONE
ROTARY PULSE
PSTN
PBX
Chapter 14