Dialling Through a Switchboard
A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your FAX
is connected through a PBX or other telephone switching system, you have to dial the
outside line access number first, and then the number of the party you are calling.
To facilitate this procedure, you can register the PBX access type and the outside line
access number under the R button so that you only need to press this button before
dialling the fax/telephone number you want to reach. See below for details.
Registering the R Button
Follow this procedure to register the PBX access type and outside line access number
under the R button:
1
Open the one-touch speed dial panel.
2
Press Data Registration.
3
Press Set twice.
4
Use
SETTING
5
Press Set.
6
Use
7
Press Set.
8
Use
your switching system.
•
You can select from the following:
–
–
Chapter 3
M
-KEY
or
to select
.
M
PBX
or
to select
.
M
or
to select the access type of
P EFIX
HOOKING
DATA EGST ATION
USE SETTINGS
DATE & TIME
-KEY SETTING
Ex:
PSTN
Ex:
HOOKING
Registering Information
PBX
3-9