dg casa SOLOMAN 12050-Q Assembly Instruction Manual

dg casa SOLOMAN 12050-Q Assembly Instruction Manual

Platform bed

Advertisement

Quick Links

WARNING

Seller and Manufacturer disclaim all and any liability for
property damage, personal injury, or loss, direct, indirect, or
incidental, resulting from the incorrect assembly, inadequate
maintenance, improper use, or neglect of this product.

NOTICE

• Keep these assembly instructions for future reference.
• Do not use this product if there are missing parts,
damaged, or broken until repairs are made and/or factory
replacement parts are installed.
• Check all packing material carefully for small hardware
that may have become loose inside the carton
during shipment.
• Identify and count all hardware and parts to compare with
parts and hardware list.
• Follow assembly instructions closely. Improper assembly
can result in personal or property damage.
• Secure all bolts and screws before use.
• Every 90 days check all bolts and screws are secured.
• Some parts may have sharp corner or edges and may
be heavy.
• Do not use or store this product near open flames or
around flammable chemicals.
• When placing contents on non-carpeted flooring, it's
recommended to use floor protection such as an area rug
or furniture pads. These are not included with the purchase.
REPLACEMENT PART OR HARDWARE REQUEST:
Request a replacement by logging into the marketplace
account in which the purchase was made and sending a
message to the seller. To assist in expediting the request
attach applicable images relevant to the request and/or
part number and quantity.

TOOLS REQUIRED:

ALLEN WRENCH
(PROVIDED)
PHILLIPS SCREWDRIVER
(NOT PROVIDED)
12050-Q

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SOLOMAN 12050-Q and is the answer not in the manual?

Questions and answers

Summary of Contents for dg casa SOLOMAN 12050-Q

  • Page 1 WARNING 12050-Q Seller and Manufacturer disclaim all and any liability for property damage, personal injury, or loss, direct, indirect, or incidental, resulting from the incorrect assembly, inadequate maintenance, improper use, or neglect of this product. NOTICE • Keep these assembly instructions for future reference. •...
  • Page 2 HARDWARE M6 x 60 FLAT WASHER M6 M6 x 50 3 PCS 16 PCS 16 PCS M8 x 50 M8 x 20 FLAT WASHER M8 8 PCS 8 PCS 8 PCS M4 x 32MM 26 PCS ADJUSTER SCREW 3 PCS ALLEN KEY M5 ALLEN KEY M4 1 PC...
  • Page 3 SOLOMAN PLATFORM BED PARTS HEADBOARD 1 PC CENTER RAIL SLAT SUPPORT 1 PC FOOTBOARD 1 PC SIDE RAIL 2 PCS SLAT 13 PCS LEG 4 PCS CORNER BLOCK 4 PCS SUPPORT LEG 3 PCS...
  • Page 4 ASSEMBLY INSTRUCTION STEP 1 ASSEMBLE LEG TO CORNER BRACKET: USING PART (J) TO ATTACH PART (d) AND PART (f) TO THE CORNER BRACKET PART (D) AND THE LEG PART (C). REPEAT, AS NECESSARY. ASSEMBLE SUPPORT LEG TO SUPPORT LEG ADJUSTER: SCREW THE SUPPORT LEG ADJUSTER PART (h) INTO EITHER END SCREW SUPPORT LEG PART (E).
  • Page 5 STEP 3 FOOTBOARD AND SIDE RAIL ASSEMBLY: ATTACH THE FOOTBOARD TO THE PREASSEMBLED SIDE RAIL BY INSTALLING PART (a) AND PART (c) THROUGH THE PRE DRILLED HOLES ON THE FOOTBOARD BRACKET INTO THE CORNER BRACKET PART (D), THEN INSTALL PART (e) THROUGH THE PREINSTALLED SIDE RAIL BRACKET INTO THE FOOTBOARD.
  • Page 6 STEP 4 HEADBOARD AND SIDE RAIL ASSEMBLY: ATTACH THE HEADBOARD TO THE PREASSEMBLED SIDE RAIL BY INSTALLING PART (a) AND PART (c) THROUGH THE PRE DRILLED HOLES ON THE HEADBOARD BRACKET INTO THE CORNER BRACKET PART (D), THEN INSTALL PART (e) THROUGH THE PREINSTALLED SIDE RAIL BRACKET INTO THE HEADBOARD.
  • Page 7 STEP 5 ATTACH SLAT PART (G) ONTO THE SIDE RAIL WOODEN SUPPORT WITH PART (g). REPEAT THIS FOR EACH OF THE SLAT END. ATTACH PREASSEMBLED SUPPORT LEG FROM STEP 1 TO CENTER SUPPORT RAIL PART (F). REPEAT AS NECESSARY. ROTATE PART (h) CLOCKWISE OR COUNTER CLOCKWISE TO ADJUST SLAT HEIGHT FOR PROPER MATTRESS SUPPORT...

This manual is also suitable for:

Soloman 12050-q series

Table of Contents