Airspace; Flarm Net; Localisation - LX Navigation Traffic square User Manual

LX Traffic Square
Device setup

5.2.4.3 Airspace

Airspace files, in
LX navigation database part of webpage, as well as supplied by competition directors,
club managers, club mates and other readily available database sources.
In order to use a certain airspace file, first you need to copy it to the LX Traffic Square's
internal memory, through the Load sub-menu, and then select it as active through the Select
sub-menu. Multiple airspace files can be selected at once.
The LX Traffic Square requires airspace files in the .cub file format.

5.2.4.4 Flarm NET

The LX Traffic Square allows the utilization of Flarm NET databases. If a database is used,
and a Flarm object with a Flarm ID found in the database shows up, the LX Traffic Square will
automatically use the info from the FlarmNET database and assign it to the said object.

5.2.5 Localisation

Contains information regarding the local settings of the LX Traffic Square. In this setup menu
the language of the device, timezone and a check box for daylight saving time can be set.
At this moment, the following languages are available:
English
Dansk
Deutsch
Italiano
Nederlands
Norsk
Slovenš ˇ cina
If you wish to contribute and add your language, contact us at LX support.
Device manual
the .cub file format,
NOTE
Public
Document name:
Document revision:
can be found
LX_SQUM
R1
on both the
32