Transport Mode - Invacare Softform Premier Active 2 User Manual

Invacare® Softform Premier Active 2 with RX pump
1. Hold down Red CPR button A.
2. Pull hose connector firmly away from the control unit B.
3. Switch off the control unit.
Mattress will start to deflate. The deflation time is
20 seconds.
4. When CPR is complete reactivate the system following
section 4.2 Installing the system, page 12.

5.4 Transport Mode

If it is necessary to move the bed or mattress simply:
1. Turn off power supply.
2. Disconnect control unit power lead (if necessary the
air hose).
3. When system is ready to reactivate following section 4.2
Installing the system, page 12.
Air supply hose should be stored by attaching to the fastener
at foot of the mattress.
16
B
A
1632862-A