If you want to configure VLANs, select the VLAN from the "Network" menu (Eth0 VLAN 1, Eth0 VLAN 2, Eth1 VLAN
1, and Eth1 VLAN 2).
●
Enable or disable the VLAN in the "Status" field.
●
Enter the parameters of your VLAN: VLAN ID, VLAN priority, IP address of the equipment in this VLAN,
and subnet mask.
●
Confirm the settings by clicking on 'Apply'.
From the "Preferences" page, you can view the IP routing table from the menu Network / IP routing.
I QOYA *CALL - IQOYA *CALL/LE
User Manual v0.99
29 / 77