Digigram IQOYA CALL Series User Manual page 23

Stereo ip audio codecs for audio contribution
Table of Contents

Advertisement

 
1.2. Connecting IQOYA *CALL and IQOYA *CALL/LE 
 
It is recommended to establish all connections before powering the device up. 
Before plugging the power cord, make sure it is not damaged. 
Just like for any other audio system, power the individual devices up following the audio path and power down in
 
 
 
 
 
the opposite direction. 
Do not allow anything to rest on the power cable. Keep the power cable away from where people could trip over it. 
 
After switching ON the codec, it takes about 30 seconds before it is operational. 
 
We recommend that the first connection to the IQOYA codec is done on a LAN. The default IP address of the
 
 
 
IQOYA codec is 192.168.0.100. Make sure all other devices connected to this LAN are in the same subnet and
 
   
have different IP addresses (this includes the PC from which you will connect to the IQOYA codec to configure it). 
To connect the IQOYA codec to the LAN, connect the Ethernet cable to the RJ45 port labeled "IP AUDIO".  
 
 
The default IP address of the "IP AUDIO" port (Eth0) is 192.168.0.100. This port is enabled by default. 
 
The default IP address of the "IP BACKUP / CONTROL" port Eth1" is 192.168.1.100. This port is
 
 
disabled by default. 
Please note that these two Ethernet ports have the same capabilities.  
 
IQOYA *CALL and IQOYA *CALL/LE embed a web server that enables you to control it through your favorite
 
 
 
Internet browser. 
 
1.2.1. WEB access rights 
IQOYA *CALL and IQOYA *CALL/LE support three categories of users: Administrator, User, Read only 
 
"Administrator" category 
A user from the "Administrator" category has all the access rights on the WEB pages. 
The login to the embedded WEB server as "Administrator" is: 
­ username: iqoya 
­ default password: iqoya 
Password can only be modified when logged as Administrator. 
 
 
"User" category 
A user from the "User" category has limited access rights. "Write" access is limited to the audio parameters
 
 
 
(audio format, source/target IP address and port). 
The login to the embedded WEB server as "User" is: 
­ username: user 
 
 
 
 
 
   
 
 
 
 
   
 
 
 
 
 
 
 
 
 
I QOYA *CALL - IQOYA *CALL/LE
 
 
 
 
 
 
   
 
 
 
   
   
 
 
 
 
 
 
User Manual v0.99
 
 
 
 
   
 
 
   
 
 
   
 
 
   
 
   
   
 
   
   
 
 
 
   
   
   
 
 
 
 
 
 
 
   
 
 
 
 
 
 
 
23 / 77 

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iqoya call/le series

Table of Contents