Table of Contents
Advertisement
2.3
Wiring definition
Below shows the standard wiring definition of the actuator. If your actuator is ordered with customized wiring,
please contact TiMOTION sales for detail information.
2.3.1 Limitations for limit switches / output signals
In general, the MA1 cable can have a maximum of 11 pins– (2 power wire pins and/or up to 9 signal wire
pins)
The function limitations for limit switches to output signals are shown in the table below:
Function for limit switches
2 limit switches to cut the current
2 limit switches for signal output
* OK = Selectable
** x = Not Compatible
Note:
Please contact the TiMOTION sales engineer if the signal outputs are customized.
Version B July 2020
Signal output
Without
POT
OK
OK
2.3.2
2.3.6
OK
OK
2.3.3
2.3.9
User Manual-MA1_DC Version
Single Hall
Double Hall
OK
OK
2.3.4
2.3.5
OK
OK
2.3.7
2.3.8
12 of 24
Advertisement
Table of Contents
Need help?
Do you have a question about the MA1_DC and is the answer not in the manual?