Maintenance; Clean The Filter - Candy CATL 7080 WKI Instruction Manual

prompt the user to deal with the problem. The next step will not continue until the "Rinse" button
is pressed.
4. "Preset" operation method
1) After turning on the power, the user wants to start the preset program. After setting the
program, water level, process and other options, the user can press the "preset" button to select
the required preset time, and then press the "start" button to start the program. After the "preset"
is activated, the digital display shows the remaining time of the preset (in hours), and the "." light
flashes and lights up.
2) After "preset" is started, other buttons are invalid except "ON/OFF" button.
3) After "preset" is started, please close the upper cover of washing machine, otherwise the
program will pause and alarm.
4) After the "Preset" is started, if you want to change the running program or cancel the preset,
you need to cut off the power supply and reset.

MAINTENANCE

1. Clean the filter .

Pull the filter out by
pressing and holding
the hook.
2. Clean the inlet valve filter.
The inlet valve filter is easy to be blocked by impurities and hinders water intake.

Please clean it regularly (usually about 2 months).
Remove the filter
from the filter
cover.
15
Turn the filter bag
from inside out,
and wash in water
to remove the lint.
Reinstall the
filter