Connection Of The Drain Hose - Candy CATL 7080 WKI Instruction Manual

2) Connection between water inlet and Washing machine
a. Before connecting, please check whether the
sealing gasket in the water inlet nut has fallen
off or not.
b. Put water inlet nut on inlet valve joint.
c. Tighten the water inlet nut.
4、Connection of the drain hose (some model drains have been installed
before leaving the factory)
1. Press down the fix ring,
and hitch it over the drain
hose.
BEFORE WASHING INSTRUCTIONS
1. Check before washing:
Is the inlet pipe connected? Is the faucet valve open?

Is the power cable plugged in? Is the power outlet grounded reliably?

Is the washing machine stable?

Is the drain put down? And no entanglement?

2. Press down the fix ring,
and then push it to the
drain outlet. Clasping the
fix ring to make sure they
are connected well.
10
Gasket
Inlet valve joint
3. Draw the drain hose to the
outlet. Do not let the height
of the drain hose exceed
90cm from the bottom of
the machine.
Nut