Super Filter - Roland SP-404MK Reference Manual

Appendix MFX List
>
Super Filter
This is a filter with an extremely sharp slope (attenuation characteristics). The cutoff frequency can be varied cyclically.
Parameter Value
CUTOFF 0‒
100
RESONANCE 0‒
100
FLT TYPE Sets the filter type.
LPF
BPF
HPF
DEPTH 0‒
100
RATE 0‒
100
SYNC OFF,
ON
Explanation
Sets the frequency range in which the filter works (the cutoff frequency). Higher values
increase the frequency range.
Adjusts the filterʼs resonance level.
The larger the value, the more that the frequency range set in CUTOFF is emphasized.
A low-pass filter. This filter lets frequencies pass through that are higher than the
frequency range set in CUTOFF.
A band-pass filter. This filter lets frequencies pass through that are near the frequency
range set in CUTOFF.
A high-pass filter. This filter lets frequencies pass through that are higher than the
frequency range set in CUTOFF.
Sets the depth of the effect.
Sets the cycle (period) of the effect.
When this is ON, the effect sound synchronizes with the tempo.