Table of Contents
Advertisement
Configuring the Various Settings (UTILITY)
Configuring the Effect Settings (EFX SET)
This shows how to edit the routing (connection order) for the effects built into this unit, and how to configure the
effects to use.
1
Hold down the [SHIFT] button and press the pad [13].
The UTILITY MENU screen appears.
2
Use the [VALUE] knob to select "EFX SET," and press the [VALUE] knob.
The effect setting screen appears. Each parameter is shown as divided into five tabs (groups).
From the top screen, you can also make this screen appear by pressing pad [16] while holding down the
[SHIFT] button.
3
Turn the [CTRL 3] knob to select a tab.
4
Select the tab of the parameter you want to edit.
Tab
FAVORITE
BUS 3, BUS
4
DIRECT
OTHER
5
Use the [VALUE] knob to move the cursor to the parameter you wish to edit, and press the [VALUE]
knob.
The value display is highlighted, and you can now edit the value.
For details on the parameters, refer to "Parameter Guide."
6
Turn the [VALUE] knob to edit the value, and press the [VALUE] knob.
7
Press the [EXIT] button to return to the UTILITY MENU screen.
Explanation
Shows the current BUS FX settings. Use the [VALUE] knob to change the FAVORITE
number.
Edits the parameters of the effects (BUS 3, BUS 4) applied to the overall sound.
You can assign the effects you like to the effect buttons on the top panel.
Sets the BUS FX routing and effects to apply to external input.
Advertisement
Table of Contents
