Table of Contents
Advertisement
Configuring the Various Settings (UTILITY)
Configuring the Effect Routing
This shows how to edit the routing (connection order) for the effects built into this unit.
1
Hold down the [SHIFT] button and press the pad [13].
The UTILITY MENU screen appears.
2
3
Use the [VALUE] knob to select "EFX SET," and press the [VALUE] knob.
The effect setting screen appears.
From the top screen, you can also make this screen appear by pressing pad [16] while holding down the
[SHIFT] button.
4
Use the [CTRL 3] knob to select "FAVORITE," and press the [VALUE] knob.
The position of the effect assigned to BUS 1 and BUS 2 changes each time you press the [VALUE] knob
("Using the Effects").
5
To finish making the settings, press the [EXIT] button.
Configuring the Effect Settings (EFX SET)
>
Advertisement
Table of Contents
