Table of Contents
Advertisement
Sampling (SAMPLING)
Sampling
This shows how to sample (record) the audio thatʼs inputted into this unit to create your own samples.
1
Press the [REC] button.
Empty pads to which samples havenʼt been assigned blink red.
The metronome sounds when the "Metronome:REC" parameter is "ON" (the SYSTEM parameter "CLICK").
Press pad [9] while holding down the [SHIFT] button to turn the metronome sound on/off.
1
Use the [CTRL 1] knob to adjust the tempo during sampling (the sample tempo), and use the [CTRL 3]
knob to adjust the volume of audio input from an external device.
2
Press pads [1]‒[16] that are blinking red.
3
Press the [REC] button.
Sampling begins.
If you decide to cancel sampling, press the [EXIT] button.
4
To quit sampling, press the pads [1]‒[16] used for sampling or the [REC] button once more.
The sample is saved to the pad.
Advertisement
Table of Contents
