Roland SP-404MK Reference Manual page 135

Configuring the Various Settings (UTILITY)
Importing a Project (IMPORT PROJECT)
You can import a project into this unit that was created on a different SP-404MKⅡ and exported to an SD card.
1
Follow the steps in "Exporting a Project (EXPORT PROJECT)" to export the project(s) to an SD card.
2
Insert the SD card on which the projects are saved into the SD card slot of this unit.
3
Hold down the [SHIFT] button and press the pad [13].
The UTILITY MENU screen appears.
4
Turn the [VALUE] knob to select "IMPORT."
The IMPORT/EXPORT MENU screen appears.
From the top screen, you can also make this screen appear by pressing pad [14] while holding down the
[SHIFT] button.
5
Use the [VALUE] knob to select "IMPORT from SD-CARD," and press the [VALUE] knob.
The IMPORT SAMPLE / PROJECT screen appears.
6
Use the [VALUE] knob to select "PROJECT," and press the [VALUE] knob.
7
Press the [ROLL] button.
The contents of the "EXPORT" folder are shown. The contents of the project folder (PROJECT̲**) that
was exported to the SD card are shown.
The contents of the "IMPORT" folder are shown first on the screen where you select the project to
import. Each time you press the [ROLL] button, the view switches between the "IMPORT" and
"EXPORT" folders.
Importing/Exporting (Using the SD Card)
>