Table of Contents
Advertisement
Appendix
Error Messages
Error
Explanation
messages
Battery Low!
The batteries are nearly depleted.
Unsupported
The file type is not supported on this unit.
FILE
No SD
No SD card is inserted. Also, the SD card
CARD!
might not be fully inserted.
Unsupported
An unsupported type of SD card has
SD Card!
been inserted.
SD CARD
The write-protect feature has been
Protected!
enabled on the SD card.
SD CARD
The SD card has run out of free space.
Full!
Internal
There is not enough storage capacity left
Storage Full!
on this unit.
Storage
A problem has occurred with the internal
Error!
storage.
Protected!
The function canʼt be executed because
bank protect is enabled.
Max Length
The maximum number of notes that can
Pattern
be recorded to the pattern sequencer
has been exceeded.
Action
Replace the batteries, or switch to an AC adaptor.
→ "About the Power Supply"
Check the file extension, format and folder directory.
→ "Importing/Exporting (Using the SD Card)"
Turn off the power, and make sure that the SD card
is fully inserted before you turn the power back on.
Please format the SD card.
→ "Formatting an SD Card"
Unlock the lock switch on the left side of the SD
card.
Delete any unneeded data on the card.
Delete any unneeded data on the unit.
Try performing a factory reset.
→ "Restoring the Factory Settings (FACTORY
RESET)"
Use a bank for which bank protect is disabled, or
disable bank protect on the currently selected bank.
→ "Selecting a Sample Bank" "Selecting a Pattern
Bank" "Protecting a Sample (PROTECT)" "Protecting
a Pattern (PROTECT)"
Reduce the number of notes in the pattern, or
shorten and split the pattern to record.
→ "Creating a New Pattern"
Advertisement
Table of Contents
