Table of Contents
Advertisement
Introduction
Panel Descriptions
>
Pad Section
1
Pads [1]‒[16]
The pads play back the samples and patterns saved in each one. Use these as controllers when in DJ
mode.
2
[BUS FX] button
Press this to switch between buses for playing back samples, or to use the MUTE BUS function.
3
[HOLD] button
You can make the samples keep playing back even after you take your fingers off the pads, by holding
down pads [1]‒[16] (to play back their samples) and pressing the [HOLD] button.
This is enabled when the [GATE] button is on.
4
[EXT SOURCE] button
Switches the external input on/off.
5
[SUB PAD] button
Use this to access different features depending on the mode, such as tap tempo input.
Advertisement
Table of Contents
