Editing a Pattern (PATTERN EDIT)
Protecting a Pattern (PROTECT)
This function prevents the samples and patterns assigned to a pad from being overwritten by being copied or edited,
or accidentally deleted.
Protection is set on a bank by bank basis. Protection is set for both samples and patterns.
1
Press the bank [A/F]‒[E/J] buttons to select the banks to protect.
To select banks F‒J, press the bank [A/F]‒[E/J] buttons twice to make them blink.
2
Hold down the [SHIFT] button and press the [COPY] button.
A protect confirmation message appears.
To cancel the protect operation, press the [EXIT] button.
3
Use the [VALUE] knob to select "OK," and press the [VALUE] knob.
To cancel protection, do the same operation again.
Organizing the Pattern Data
>