Configuring the Various Settings (UTILITY)
Assigning the Desired Effect to an Effect Button (DIRECT FX)
You can assign the effects you like to the effect buttons on the top panel.
1
Hold down the [SHIFT] button and press the pad [13].
The UTILITY MENU screen appears.
2
Use the [VALUE] knob to select "EFX SET," and press the [VALUE] knob.
The effect setting screen appears.
From the top screen, you can also make this screen appear by pressing pad [16] while holding down the
[SHIFT] button.
3
Turn the [CTRL 3] knob to select "DIRECT."
4
Use the [VALUE] knob to select the effect button to which the effect is to be assigned.
Effect button to assign
[FILTER+DRIVE] button
[RESONATOR] button
[DELAY] button
[ISOLATOR] button
[DJFX LOOPER] button
You can also press an effect button to change its assigned effect.
5
Press the [VALUE] knob.
The value display is highlighted, and you can now change the effects.
6
Use the [VALUE] knob to select the effect, and press the [VALUE] knob.
The effect is assigned to the effect button you selected. After this, you can use the effect buttons on the
top panel to switch the assigned effects on/off.
7
To finish making settings, press the [EXIT] button.
Configuring the Effect Settings (EFX SET)
>
Parameter
Direct FX1
Direct FX2
Direct FX3
Direct FX4
Direct FX5