Yamaha VMAX 2009 Service Manual page 458

4. Check the turn signal/hazard relay.
Refer to "CHECKING THE TURN
SIGNAL/HAZARD RELAY" on page
8-138.
OK ↓
5. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-21.
OK ↓
Replace the meter assembly 1.
The neutral indicator light fails to come on.
1. Check the gear position switch.
Refer to "CHECKING THE
SWITCHES" on page 8-129.
OK ↓
2. Check the relay unit (diode).
Refer to "CHECKING THE RELAY
UNIT (DIODE)" on page 8-138.
OK ↓
3. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-21.
OK ↓
Replace the meter assembly 1.
The shift indicator fails to come on.
1. Check the gear position switch.
Refer to "CHECKING THE
SWITCHES" on page 8-129.
OK ↓
NG →
Replace the turn signal/hazard relay.
NG →
Properly connect or repair the signaling
system wiring.
NG →
Replace the gear position switch.
NG →
Replace the relay unit.
NG →
Properly connect or repair the signaling
system wiring.
NG →
Replace the gear position switch.
8-25
SIGNALING SYSTEM