Yamaha VMAX 2009 Service Manual page 226

5. Connect the test coupler adapter "1" to the
ABS test coupler "2".
Test coupler adapter
90890-03149
2
1
6. Set the engine stop switch "1" to "
7. Turn the main switch to "ON".
8. Push the start switch "1" for at least 4 sec-
onds.
ECA14790
NOTICE
Do not operate the brake lever or the brake
pedal.
".
1
ABS (ANTI-LOCK BRAKE SYSTEM)
9. After releasing the start switch, operate the
brake lever and the brake pedal simulta-
neously.
10.A reaction-force pulsating action is generated
in the brake lever "1" 0.5 second after the
brake lever and the brake pedal are operated
simultaneously and continues for approxi-
mately 1.5 seconds.
TIP
• The reaction-force pulsating action consists of
quick pulses.
• Be sure to continue operating the brake lever
and brake pedal even after the pulsating action
has stopped.
11.After the pulsating action has stopped in the
brake lever, it is generated in the brake pedal
"1" 0.5 second later and continues for approx-
imately 2 seconds.
TIP
• The reaction-force pulsating action consists of
quick pulses.
4-61
1
1