Yamaha VMAX 2009 Service Manual page 38

1. Push "SELECT" to highlight "All".
2. Push "RESET"; "On" is displayed.
3. Push "RESET" and the r/min digits start flash-
ing.
4. Push "SELECT" to highlight the engine speed
at which the shift timing indicator light is acti-
vated.
5. Push "RESET" to set the selected engine
speed. "Off" is highlighted and the r/min digits
start flashing.
6. Push "SELECT" to highlight the engine speed
at which the shift timing indicator light is deac-
tivated.
7. Push "RESET" to set the selected engine
speed.
8. Push "RESET" again to return to the previous
menu.
To set individual gear r/min:
1. Push "SELECT" to highlight gears from "1st"
through "5th", then push "RESET".
2. Push "RESET" and the r/min digits for the
highlighted gear start flashing, then perform
steps 4-8 under "To set all gears to the same
r/min:" in order to set the r/min for the individ-
ual gears.
TIP
After setting r/min for individual gears, if "All" is
chosen, all previously set r/min for individual
gears return to the default settings of 9000 (acti-
vation) and 11000 (deactivation).
3. Push "SELECT" to scroll to "
"RESET" to return to the previous menu.
Setting the shift timing indicator light brightness
This function allows you to adjust the brightness
of the shift timing indicator light.
1. Push "SELECT" to highlight "Brightness".
2. Push "RESET" and the brightness level seg-
ments start flashing.
3. Push "SELECT" to highlight the desired
brightness level.
4. Push "RESET" to set the selected brightness
level.
5. Push "RESET" to return to the previous
menu.
6. Push "SELECT" to scroll to "
"RESET". This allows you to select another
item in the menu.
Setting the clock
1-29
FEATURES
", then push
", then push