Installing The Engine - Yamaha VMAX 2009 Service Manual

EAS23720

INSTALLING THE ENGINE

1. Install:
• Engine mounting collar (inside) "1"
• Engine mounting collar (outside) "2"
• Engine mounting collar (inside) "3"
• Engine mounting collar (outside) "4"
• Engine "5"
• Engine mounting bolt (rear lower side) "6"
• Engine mounting nut (rear lower side) "7"
• Engine mounting bolt (rear left upper side) "8"
• Engine mounting bolt (rear right upper side)
"9"
• Engine bracket (front side) "10"
• Engine bracket bolt (front center side) "11"
• Engine bracket bolt (front left side) "12"
• Engine bracket bolt (front right side) "13"
• Engine mounting bolt (front side) "14"
• Engine mounting nuts (front side) "15"
TIP
• Lubricate the engine mounting bolt threads
(front and rear) and engine bracket bolt
threads (front center, front right and front left)
with lithium-soap-based grease.
• Do not fully tighten the bolts and nuts.
2. Tighten:
• Engine bracket bolt (front center side) "11"
• Engine bracket bolt (front left side) "12"
• Engine bracket bolt (front right side) "13"
• Engine mounting bolt (front side) "14"
• Engine mounting nuts (front side) "15"
• Engine mounting nut (rear lower side) "7"
• Engine mounting bolt (rear left upper side) "8"
• Engine mounting bolt (rear right upper side)
"9"
Engine bracket bolt (front center
side)
60 Nm (6.0 m·kgf, 43 ft·lbf)
Engine bracket bolt (front left
side)
60 Nm (6.0 m·kgf, 43 ft·lbf)
Engine bracket bolt (front right
side)
60 Nm (6.0 m·kgf, 43 ft·lbf)
Engine mounting bolt (front side)
60 Nm (6.0 m·kgf, 43 ft·lbf)
Engine mounting nut (front side)
60 Nm (6.0 m·kgf, 43 ft·lbf)
Engine mounting nut (rear lower
side)
60 Nm (6.0 m·kgf, 43 ft·lbf)
Engine mounting bolt (rear left
upper side)
60 Nm (6.0 m·kgf, 43 ft·lbf)
Engine mounting bolt (rear right
upper side)
60 Nm (6.0 m·kgf, 43 ft·lbf)
3. Install:
• Engine bracket (left side) "16"
• Engine mounting bolts (left side) "17"
• Engine bracket bolts (left side) "18"
• Engine bracket (right side) "19"
• Engine mounting bolts (right side) "20"
• Engine bracket bolts (right side) "21"
TIP
Do not fully tighten the bolts.
4. Tighten:
• Engine mounting bolts (left side) "17"
• Engine bracket bolts (left side) "18"
• Engine mounting bolts (right side) "20"
• Engine bracket bolts (right side) "21"
Engine mounting bolt (left side)
60 Nm (6.0 m·kgf, 43 ft·lbf)
Engine bracket bolt (left side)
60 Nm (6.0 m·kgf, 43 ft·lbf)
Engine mounting bolt (right side)
60 Nm (6.0 m·kgf, 43 ft·lbf)
Engine bracket bolt (right side)
60 Nm (6.0 m·kgf, 43 ft·lbf)
5-7
ENGINE REMOVAL