Yamaha Star XVS950A 2009 Service Manual page 172

3. Install:
• Inner tube
(in the outer tube)
4. Install:
• Copper washer
• Damper rod bolt
5. Tighten:
• Damper rod bolt "1"
Damper rod bolt
30 Nm (3.0 m·kgf, 22 ft·lbf)
LOCTITE®
TIP
While holding the damper rod assembly with
the damper rod holder "2" and T-handle "3",
tighten the damper rod bolt.
Damper rod holder
90890-01460
T-handle
90890-01326
T-handle 3/8" drive 60 cm long
YM-01326
6. Install:
• Outer tube bushing "1"
• Washer
(with the fork seal driver "2")
Fork seal driver
90890-01442
Adjustable fork seal driver (36–
46 mm)
YM-01442
New
New
7. Install:
• Oil seal "1"
(with the fork seal driver "2")
ECA14220
Make sure the numbered side of the oil seal
faces up.
TIP
• Before installing the oil seal, lubricate its lips
with lithium-soap-based grease.
• Lubricate the outer surface of the inner tube
with fork oil.
• Before installing the oil seal, cover the top of
the front fork leg with a plastic bag to protect
the oil seal during installation.
2
8. Install:
• Oil seal clip "1"
4-51
FRONT FORK
New
1 New
New