Installing The System; Materials Needed; Opening The Panel Cover And Chassis - GE Simon 60-875 Installation Instructions Manual

Hide thumbs Also See for Simon 60-875:
Table of Contents

Advertisement

Installing the
System
Note
If Option 40 Trouble Beeps
is on, the panel will sound
six trouble beeps every
minute the panel cover is
open.
Simon Security System
Use the following tables to help you further plan X10 module installation.
X10 House Code Assignments
X10 Device
Lamp, Appliance, Universal
Remote Siren
X10 Unit Number Assignments
Unit #
1 - 8
Used for sensor-activated, time-activated, and entry/exit delay lights.
Sensor activated lights are enabled and disabled by pressing the
LIGHTS Sensor Activated button on the panel.
Time activated lights are enabled and disabled by pressing the
LIGHTS Time Activated button on the panel.
If using the universal module to operate a device, be sure to assign a
unique unit number.
The STAR button on the KeyChain Touchpad activates the universal
module controlled device or to turn on special lights if programmed.
9
Used for remote siren or light control.
For remote siren use, sirens with this setting sound alarms, arming
level beeps, status beeps, and trouble beeps.
For light control, lamp modules with this setting are controlled by an
all on or all off command.
10
Used for remote siren or light control.
For remote siren use, sirens with this setting only sound alarms.
For light control, lamps will flash according to selected arming level
and are controlled by an all on or all off command.
11 -
Used for lamp modules and controlled by an all on or all off com-
16
mand.
This section describes how to open the panel for mounting, mount the panel, connect
sirens, hardwire contacts, and the AC power transformer.

Materials Needed

Pencil
Phillips Screwdriver

Opening the Panel Cover and Chassis

Tabs at the top of the panel secure and release the front cover and the chassis. The
plastic hinges on the panel bottom allow the cover and chassis to swing down and out
of the way (see Figure 2).
Settings
Set all modules to the same house code (A
- O) except the remote sirens.
House code must be set to the next higher
alphabetical letter.
Result
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simon 60-910Simon 600-1012

Table of Contents