Collector Removal; Storage - Briggs & Stratton 1695596 Operator's Manual

Operation
C
I
G H
K
L
M
Figure 15

Collector Removal

: Operation Without Bagger
CAUTION
For operation without bagger, the mower defl ector MUST
be properly installed in the down position and retained by
the spring latch.
1. Lift up cover (A, Figure 15), then remove and empty bags (B).
2. Loosen middle tube strap from lower chute (C) and
remove middle / upper tube assembly (D).
3. Remove hitch and frame assembly (E) from rear of
tractor.
D
F
J
E
B
4. Lift discharge defl ector (F). Remove lower chute rod (G)
from mounting plate (H).
5. Remove mounting strap (I) from locknut and capscrew
(J) and pull lower chute away from mower.
6. Remove all carriage bolts (K) and nuts (L) and remove
baffl es (M).

Storage

Storing The Grass Catcher
Clean the grass catcher thoroughly using a mild detergent
(other products may damage the tube). Remove any debris
from the screen on the underside of the lid.
If paint has been scratched on metal parts, touch up with
paint, or apply a thin fi lm of oil to prevent corrosion.
Store in a dry area. Dry thoroughly before storing for a long
period of time. Always store away from moisture.
10
A