Advertisement
Removal
WARNING
When operating without the catcher, the mower deflector
MUST be installed in the down position.
WARNING
• DO NOT operate the unit without either the entire
grass catcher or the deflector in place.
1. Lift the cover assembly (I, Figure 6).
2. Remove the bags (J). Empty and let the bags dry.
I
J
Figure 6
3. Remove the rear support frame (a, Figure 7) from the
rear of the rider.
Figure 7
4. Remove the catcher boot kit or turbo kit. Refer to the
catcher boot kit or turbo kit manual.
Storage
Clean the grass catcher with a mild detergent. Remove
debris from the screen on the bottom of the lid.
If paint is scratched on metal parts, paint the parts again, or
apply a thin layer of oil to prevent corrosion.
Keep in a dry area. Dry fully before long term of storage.
Always store away from moisture.
a
7
Advertisement
