Step 3: Connecting The Mains Lead; Step 4: Quick Setup - Sony DVP-NS400D Operating Instructions Manual

Step 3: Connecting the Mains Lead

Plug the player and TV mains lead (power cord) into a mains.
Do not connect the mains lead of your player to the "switched" mains of an amplifier (receiver).
When you turn off the power of your amplifier (receiver) the menu setting for the player such as
Playback Memory may be lost.

Step 4: Quick Setup

Follow the steps below to make the minimum number of base adjustments use the player. To skip
an adjustment, press >. To return to the previous adjustment, press ..
1 Turn on the TV.
2 Switch the input selector on the TV to the player.
3 Press POWER on the player and press [/1 on the remote.
"Press [ENTER] to run QUICK SETUP" appears at the bottom of the screen. If this message does
not appear, select "QUICK" under "SETUP" in the Control Menu to run Quick Setup (page 68).
4 Press ENTER without inserting a disc.
The Setup Display for selecting the language used in the on-screen display appears.
28
POWER
LANGUAGE SETUP
OSD:
DVD MENU:
AUDIO:
SUBTITLE:
ENTER
./> X/x
ENGLISH
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
ESPAÑOL
NEDERLANDS
DANSK
SVENSKA
[/1
1 2 3
4 5 6
7 8 9
0
./>
X/x
ENTER