Sony DVP-NS400D Operating Instructions Manual page 72

OFF
TIMER
DEMO1
DEMO2
xDIMMER
Adjusts the lighting of the front panel display.
BRIGHT
DARK
OFF
xPAUSE MODE (DVD only)
Selects the picture in pause mode.
AUTO
FRAME
xPARENTAL CONTROL t (DVD only)
Sets a password and playback limitation level
for DVDs with playback limitation for
children. For details, see "Limiting playback
by children (Parental Control)" (page 62).
xPLAYBACK MEMORY
The player can store the SUBTITLE and
other settings of each disc for up to 50 discs
(Playback Memory).
Set the Playback Memory function on or off.
ON
72
Does not use "TIMER," "DEMO1,"
or "DEMO2" to start playback.
Starts playing when the player is
turned on. The player can be
played at any time when
connected to a timer (not
supplied). Set the timer when the
player is in standby mode (the
power indicator lights up in red).
Starts playing the first
demonstration automatically.
Starts playing the second
demonstration automatically.
Makes the front panel display
bright.
Makes the front panel display dark.
Turns off the lighting of the front
panel display.
The picture, including subjects
that move dynamically, is output
with no jitter. Normally select
this position.
The picture, including subjects
that do not move dynamically, is
output in high resolution.
Stores the settings in memory when
you eject the disc.
OFF Does not store the settings in
memory.
The following settings are stored in memory
by the Playback Memory function.
— AUDIO (page 51)*
— BNR (page 59)
— DIGITAL VIDEO ENHANCER (page 59)
— SUBTITLE (page 58)*
— SURROUND (page 53)
DVD only
Notes
The player can store the settings of up to 50 discs.
When you store the setting of disc number 51, the
first disc setting is cancelled.
Depending on the DVD, the information stored in
the disc takes priority over the Playback Memory
settings and the function does not work.
During playback, do not turn off the player by
pressing POWER on the player. Doing so may
cancel the settings. When you turn off the player,
press x first to stop playback and then press [/1 on
the remote. After the power indicator lights up in red
and the player enters standby mode, press POWER
on the player.
xTRACK SELECTION (DVD only)
Gives the sound track which contains the
highest number of channels priority when
you play a DVD on which multiple audio
formats (PCM, MPEG audio, DTS, or Dolby
Digital format) are recorded.
OFF
No priority given.
AUTO
Priority given.
Notes
When you set the item to "AUTO," the language
may change. The "TRACK SELECTION" setting
has higher priority than the "AUDIO" settings in
"LANGUAGE SETUP" (page 69).
If you set "DTS" to "OFF" (page 74), the DTS sound
track is not played even if you set "TRACK
SELECTION" to "AUTO".
If PCM, DTS, MPEG audio, and Dolby Digital
sound tracks have the same number of channels, the
player selects PCM, DTS, Dolby Digital and MPEG
audio sound tracks in this order.
Depending on the DVD, the audio channel with
priority may be predetermined. In this case, you
cannot give priority to the DTS, Dolby Digital, or
MPEG audio format by selecting "AUTO."