Sony DVP-NS400D Operating Instructions Manual page 31

4
Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
If your AV amplifier (receiver) has an MPEG audio decoder, set "MPEG" to "MPEG" (page
74).
When 5.1 CH OUTPUT is selected
1
Press X/x to select the size of the centre speaker.
If no centre speaker is connected, select "NONE." Refer to page 76 for each selection item.
2
Press ENTER.
The Setup Display for selecting the size of the rear speaker appears.
3
Press X/x to select the size.
If no rear speaker is connected, select "NONE."
"SIDE" and "REAR" refer to the speakers' position relative to your listening position.
Refer to page 76 for each selection item.
4
Press ENTER.
The Setup Display for selecting whether or not you have connected a subwoofer appears.
5
Press X/x to select the item.
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
OFF
TEST TONE:
FRONT:
CENTER:
REAR:
SUBWOOFER:
T t th ENTER
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
TEST TONE: OFF
FRONT:
CENTER:
REAR:
SUBWOOFER:
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
TEST TONE: OFF
FRONT:
CENTER:
REAR:
SUBWOOFER:
To set, press , then
ENTER
T it
SETUP DISPLAY
LARGE
NONE
NONE
LARGE
SMALL
LARGE
LARGE
NONE
NONE
LARGE(REAR)
LARGE
LARGE
LARGE(REAR)
NONE
NONE
.
YES
continued
31