Hookups; Hooking Up The Player; Step 1: Connecting The Video Cords - Sony DVP-NS400D Operating Instructions Manual

Hookups

Hooking Up the Player

Follow Steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, turn off the power, check that you have all of the supplied accessories, and insert
the batteries into the remote (page 14).
Notes
Plug cords securely to prevent unwanted noise.
Refer to the instructions supplied with the components to be connected.

Step 1: Connecting the Video Cords

Connect this player to your TV monitor, projector or, AV amplifier (receiver) using a video cord.
Select one of the patterns A through C, according to the input jack on your TV monitor, projector,
or AV amplifier (receiver).
A
TV
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL OPTICAL
INPUT
VIDEO
(yellow)
L
AUDIO
R
TV, projector or AV
B
amplifier (receiver)
l : Signal flow
18
LINE 1 (RGB)-TV LINE 2
LINE OUT S VIDEO OUT
R-AUDIO-L VIDEO
Audio/video cord
(supplied)
VCR
SCART (EURO AV) cord
(not supplied)
5.1CH OUTPUT
FRONT REAR CENTER
L
WOOFER
R
(yellow)
S VIDEO cord
(not supplied)
connecting
the VCR
CD/DVD player
INPUT
S VIDEO
TV, projector or AV
amplifier (receiver)
C