Step 4: Connecting The Audio Cords; Step 5: Connecting The Mains Lead; Step 6: Quick Setup - Sony DVP-NS30 Servise Manual

QQ
3 7 63 1515 0
◆PROGRESSIVE VIDEO
Select this setting when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT VIDEO OUT jacks, and
– you want to fix the conversion method to PROGRESSIVE VIDEO for video-based software.
Select this if the image is not clear when you select PROGRESSIVE AUTO.
Note that the picture will not be clear or no picture will appear if you select these settings when
either of the above conditions is not met.
◆NORMAL (INTERLACE)
Select this setting when:
– your TV does not accept progressive signals, or,
– your TV is connected to jacks other than the COMPONENT VIDEO OUT jacks (LINE OUT
(VIDEO) or S VIDEO OUT).
◆About DVD software types and the conversion method
DVD software can be divided into two types: film-based software and video-based software.
Video-based software is derived from TV, such as dramas and sit-coms, and displays images at
25 frames/50 fields (30 frames/60 fields) per second. Film-based software is derived from film
and displays images at 24 frames per second. Some DVD software contains both video and film.
In order for these images to appear natural on your screen when output in progressive format,
the progressive signals need to be converted to match the type of DVD software that you are
watching.
Notes
• When you play video-based software in progressive signal format, sections of some types of images may
appear unnatural due to the conversion process when output through the COMPONENT VIDEO OUT
jacks. Images from the S VIDEO OUT and LINE OUT (VIDEO) jacks are unaffected as they are output in
the normal (interlace) format.
• If you set "LINE" in "SCREEN SETUP" to "RGB," then the player switches to "NORMAL
(INTERLACE)." This will happen even though you select "PROGRESSIVE AUTO" or "PROGRESSIVE
VIDEO."
• When using LINE OUT (VIDEO) or S VIDEO OUT, the picture may appear to flicker each time the
PROGRESSIVE button on the front panel is pressed (Interlace switches to Progressive or vice versa).
TE
L 13942296513
A
Connecting to audio L/R input
jacks
This connection will use your TV's or stereo
amplifier's (receiver's) two speakers for
sound. Connect using the audio/video cord
(not supplied).
Yellow
White (L)
Red (R)
• Surround effect (page 44)
TV: Dynamic Theatre, Dynamic, Wide,
Night
Stereo amplifier (receiver): Standard, Night
www
.
http://www.xiaoyu163.com
,continued
B
Connecting to a digital audio
input jack
If your AV amplifier (receiver) has a Dolby*
2
Digital, DTS* or MPEG audio decoder and
a digital input jack, use this connection.
Connect using a coaxial or optical (DVP-
NS52P only) digital cord (not supplied).
Yellow
Coaxial cord
White (L)
Red (R)
Optical cord
• Surround effect
Dolby Digital (5.1ch), DTS (5.1ch), MPEG
audio (5.1ch)
*1
Manufactured under license from Dolby
Laboratories.
"Dolby," "Pro Logic," and the double-D symbol
are trademarks of Dolby Laboratories.
*2
"DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
Notes
• After you have completed the connection, make
the appropriate settings in Quick Setup (page 22).
If your AV amplifier (receiver) has an MPEG
audio decoder function, set "MPEG" to "MPEG"
in Audio Setup (page 69). Otherwise, no sound or
a loud noise will come from your speakers.
• The surround sound effects of this player cannot
be used with this connection.
• In order to listen to DTS sound tracks, you must
use this connection. DTS sound tracks are not
output through the LINE OUT L/R (AUDIO)
jacks, even if you set "DTS" to "ON" in Quick
Setup (page 22).
x ao u163
y
i
,continued
http://www.xiaoyu163.com
2 9
8

Step 4: Connecting the Audio Cords

Select one of the following patterns A or B, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
This will enable you to listen to sound.
R AUDIO
COAXIAL
OPTICAL
DIGITAL OUT
COMPONENT VIDEO OUT
COAXIAL
OPTICAL
DIGITAL OUT
Optical digital cord (not supplied)
Remove jack cap before connecting
[Speakers]
Rear (L)
Front (L)
Center
: Signal flow
1
* The yellow plug is used for video signals (page 16).
2
* DVP-NS52P only.
z Hint
Q Q
For correct speaker location, see the operating instructions supplied with the connected components.
3 6 7 1 3 1 5
19 20

Step 5: Connecting the Mains Lead

1
Plug the player and TV mains lead (power cord) into a mains.

Step 6: Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
The on-screen display differ depending on the player model.
1
Turn on the TV.
2
Press [/1.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
"Press [ENTER] to run QUICK SETUP"
(press enter to run Quick Setup) appears
at the bottom of the screen. If this
message does not appear, select
"QUICK" (quick) under "SETUP"
(setup) in the Control Menu to run Quick
Setup (page 65).
4
Press ENTER without inserting a
co
disc.
The Setup Display for selecting the
language used in the on-screen display
.
appears.
The available languages differ depending
upon the player model.
21 22
1-5
DVP-NS30/NS32/NS33/NS52P
9 4 2 8
1
(red) (yellow)* INPUT
Audio/video cord
(not supplied)
(white) (white)
1
(yellow)* (red)
TV, projector, or AV
LINE OUT amplifier (receiver)
VIDEO
L
to LINE OUT L/R (AUDIO)
LINE OUT
LINE
L C E N T E R
VIDEO
(RGB)
R AUDIO L
-TV
Y P /C B B P R /C R
S VIDEO OUT
CD/DVD player
to DIGITAL OUT
2
(COAXIAL or OPTICAL* )
or
Coaxial digital cord
(not supplied)
to optical to coaxial
[Speakers]
digital input digital input
AV amplifier (receiver)
with a decoder
0 5 8 2 9 9 4 2 8
ENTER
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
5
Press X/x to select a language.
The player displays the menu and
subtitles in the selected language.
6
Press ENTER.
m
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
LINE:
4:3 OUTPUT:
9 9
A
VIDEO
L
AUDIO
R
B
Rear (R)
Front (R)
Subwoofer
9 9
ENGLISH
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
ESPAÑOL
NEDERLANDS
DANSK
SVENSKA
16:9
16:9
4:3 LETTER BOX
4:3 PAN SCAN
FULL