Table of Contents
Advertisement
Step 5: Connecting the Mains Lead
Plug the player and TV mains lead (power cord) into a mains.
Step 6: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press .. The on-
screen displays differ depending on the player model.
1
4
Turn on the TV.
Press ENTER without inserting a
disc.
2
Press [/1.
The Setup Display for selecting the
language used in the on-screen display
3
Switch the input selector on your
appears.
The available languages differ depending
TV so that the signal from the
upon the player model.
player appears on the TV screen.
"Press [ENTER] to run QUICK SETUP"
(press enter to run Quick Setup) appears
at the bottom of the screen. If this
message does not appear, select
"QUICK" (quick) under "SETUP"
(setup) in the Control Menu to run Quick
Setup (page 68).
5
Press X/x to select a language.
The player displays the menu and
subtitles in the selected language.
4
Press A on the player, and place a
disc on the disc tray.
Playing Discs
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Playback side facing down
Refer to the operating instructions supplied
5
with your disc.
Press H.
The disc tray closes. The player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
MIC 1
MIC 2
MIC 1
LEVEL
MIC 2
(receiver).
MIN
MAX
MIN
MAX
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 24. For VIDEO CDs,
see page 25.
To turn off the player
Press [/1. The player enters standby mode.
z Hint
You can have the player turn off automatically
ENTER
whenever you leave it in stop mode for more than
RETURN
30 minutes. To turn this function on or off, set
"AUTO POWER OFF" in "CUSTOM SETUP" to
"ON" or "OFF" (page 71).
Note
Discs created on DVD recorders must be correctly
finalized before they can be played. For more
1
information about finalizing, refer to the operating
Turn on your TV.
instructions supplied with the DVD recorder.
2
Press [/1.
Notes on playing DTS sound tracks on a
DVD VIDEO
The player turns on.
• DTS audio signals are output only through
3
the DIGITAL OUT (COAXIAL or
Switch the input selector on your
OPTICAL) jack.
TV so that the signal from the
• When you play a DVD VIDEO with DTS
player appears on the TV screen.
sound tracks, set "DTS" to "ON" in
"AUDIO SETUP" (page 73).
◆ When using an amplifier (receiver)
• If you connect the player to audio
Turn on the amplifier (receiver) and
equipment without a DTS decoder, do not
select the appropriate channel so that you
set "DTS" to "ON" in "AUDIO SETUP"
can hear sound from the player.
(page 73). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.
ENTER
LANGUAGE SETUP
OSD:
ENGLISH
MENU:
ENGLISH
CHINESE1
AUDIO:
SUBTITLE:
CHINESE2
THAI
,continued
19
,continued
21
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
TV TYPE:
COLOR SYSTEM (VIDEO CD):
SCREEN SAVER:
4:3 LETTER BOX
BACKGROUND:
4:3 PAN SCAN
PROGRESSIVE
:
(COMPONENT OUT)
MODE
:
(PROGRESSIVE)
4:3 OUTPUT:
7
Press X/x to select the setting that
matches your TV type.
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 69)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 69)
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
Is this player connected to an
amplifier (receiver) ? Select the type
of jack you are using.
YES
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
NO
9
Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
If you did not connect an AV amplifier
(receiver), select "NO," then go to step
13.
If you connected an AV amplifier
(receiver) using just an audio cord, select
"YES: LINE OUTPUT L/R (AUDIO),"
then go to step 13.
If you connected an AV amplifier
(receiver) using either a digital optical or
coaxial cord, select "YES: DIGITAL
OUTPUT."
20
Additional operations
CLEAR
(replay)
(advance)
ZOOM
SLOW PLAY
FAST PLAY
To
Operation
Press x
Stop
Press X
Pause
Press X or H
Resume play after
pause
Press >
Go to the next chapter,
track, or scene in
continuous play mode
Press .
Go back to the
previous chapter,
track, or scene in
continuous play mode
Press Z
Stop play and remove
the disc
Replay the previous
Press
1
scene*
during playback
Briefly fast forward
Press
2
the current scene*
(advance) during
playback
3
Magnify the image*
Press ZOOM
repeatedly. Press
CLEAR to cancel.
1
*
All DVDs except for DVD+RWs/DVD+Rs/
DVD+Rs DL. The button cannot be used for
DivX video files.
2
*
DVDs only. The button cannot be used for
DivX video files.
3
*
Video and JPEG pictures only (except
BACKGROUND pictures). You can move the
enlarged picture using C/X/x/c. Depending
upon the contents of the disc, the zoom function
may be cancelled automatically when the
picture is moved.
22
1-5
DVP-K88P/K88PM
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
If your AV amplifier (receiver) has a
Dolby Digital decoder, select "DOLBY
16:9
DIGITAL." Otherwise, select "D-PCM."
16:9
AUDIO SETUP
OFF
AUDIO DRC:
STANDARD
AUTO
DOWNMIX:
DOLBY SURROUND
FULL
DIGITAL OUT:
ON
DOLBY DIGITAL:
D-PCM
MPEG:
D-PCM
DTS:
DOLBY DIGITAL
48kHz/96kHz PCM:
48kHz/16bit
11
Press ENTER.
"DTS" is selected.
AUDIO SETUP
AUDIO DRC:
STANDARD
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
ON
DOLBY DIGITAL:
D-PCM
MPEG:
PCM
DTS:
OFF
48kHz/96kHz PCM:
OFF
ON
12
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
If your AV amplifier (receiver) has a
DTS decoder, select "ON." Otherwise,
select "OFF."
13
Press ENTER.
Quick Setup is finished and connections
are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, set "MPEG" to
"MPEG" (page 73).
Note
You may not be able to use the Replay or Advance
function with some scenes.
Playback quickly or slowly with
sound
You can listen to dialogue or sound while
playing the current scene quickly or slowly.
During playback, press FAST PLAY or
SLOW PLAY.
The speed changes when you press either
FAST PLAY or SLOW PLAY.
To return to normal playback
Press H.
Notes
• You can only use this function with DVDs,
VIDEO CDs, or Super VCDs only.
• "Operation not possible" will appear when
maximum or minimum speed is reached.
• During Fast Play or Slow Play mode, you cannot
change the angle (page 49), subtitle (page 49),
and sound (page 45). The sound can only be
changed for VIDEO CDs/Super VCDs.
• Fast Play and Slow Play functions do not work
when playing DTS sound tracks.
• You cannot use Fast Play or Slow Play function
when playing a still picture in DVD-VR mode.
Locking the disc tray (Child
Lock)
You can lock the disc tray to prevent children
from opening it.
(replay)
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 on the
remote.
The player turns on and "LOCKED" appears
on the front panel display. The A and Z
buttons on the player or the remote do not
work while the Child Lock is set.
To unlock the disc tray
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 again.
Note
Even if you select "RESET" under "SETUP" in the
Control Menu (page 68), the disc tray remains
locked.
Advertisement
Table of Contents
