Sony DVP-NS400D Operating Instructions Manual page 75

xMPEG
Selects the MPEG audio signals to be output
via the DIGITAL OUT (OPTICAL or
COAXIAL) jack.
PCM Select this when the player is
connected to an audio
component lacking a built-in
MPEG decoder. If you play
MPEG audio sound tracks, the
player outputs stereo signals via
the DIGITAL OUT (OPTICAL
or COAXIAL) jack.
MPEG
Select this when the player is
connected to an audio
component having a built-in
MPEG decoder. If the player is
connected to an audio
component lacking a built-in
MPEG decoder, do not set this.
Otherwise, when you play the
MPEG audio sound track, a loud
noise (or no sound) will come
out from the speakers, affecting
your ears or causing the speakers
to be damaged.
xDTS
Selects if DTS signals are output via the
DIGITAL OUT (OPTICAL or COAXIAL)
jack.
OFF
Select this when the player is
connected to an audio
component lacking a built-in
DTS decoder. Note, however,
that the DTS signals contained in
a CD are output even if "OFF" is
selected.
ON
Select this when the player is
connected to an audio
component having a built-in
DTS decoder.
If the player is connected to an
audio component lacking a built-
in DTS decoder, do not set this.
Otherwise, when you play the
DTS sound track, a loud noise
(or no sound) will come out from
the speakers, affecting your ears
or causing the speakers to be
damaged.
x48kHz/96kHz PCM (DVD only)
Selects the sampling frequency of the audio
signal to be output via the DIGITAL OUT
(OPTICAL or COAXIAL) jack.
48kHz/16bit
The audio signals of DVDs are
always converted to 48kHz/
16bit.
96kHz/24bit
All types of signals including
96kHz/24bit are output in their
original format. However, if the
signal is encrypted for copyright
protection purposes, the signal is
only output as 48kHz/16bit.
If a receiver (amplifier) which
cannot accept 96kHz is
connected to the player, do not
set this. Otherwise, a loud noise
may come out from the speakers.
Notes
Even if you set "48kHz/96kHz PCM" in "AUDIO
SETUP" to "96kHz/24bit," the sampling frequency
is converted to 48kHz/16bit when a SURROUND
mode (page 53) is selected.
The analog audio signals from the LINE OUT L/R
(AUDIO) jacks are not affected by this setting and
keep their original sampling frequency level.
75