Sony DVP-NS400D Operating Instructions Manual page 23

Connecting to an AV amplifier (having 5.1ch input jacks or a digital input
B
jack) and 4 to 6 speakers
If your AV amplifier (receiver) has 5.1 channel inputs, use
If you want to use the Dolby Digital, MPEG audio, or DTS decoder function on your AV
amplifier (receiver), connect to its digital jack using
can enjoy a more realistic audio presence in the comfort of your own home.
: Connecting to the 5.1ch input jacks
B-1
You can enjoy 5.1ch surround sound using the internal Dolby Digital decoder of this player. You
can also enjoy Dolby Surround (Pro Logic) sounds, or surround sounds using various
SURROUND modes (page 53).
xRecommended surround sound effects for this connection.
When 6 speakers are connected.
Dolby Digital (5.1ch) (page 82)
(Set "SURROUND" to "OFF.")
: Connecting to a digital jack
B-2
This connection will allow you to use the Dolby Digital, MPEG audio, or DTS decoder function
of your AV amplifier (receiver). You are not able to enjoy the SURROUND sound effects of the
player.
xRecommended surround sound effects using this connection with your amplifier (receiver).
Dolby Digital (5.1ch) (page 82)
DTS (5.1ch) (page 82)
MPEG audio (5.1ch) (page 82)
Note
After you have completed the connection, be sure to set "DOLBY DIGITAL" to "DOLBY DIGITAL" (page 30). If
your AV amplifier (receiver) has a DTS decoder, set "DTS" to "ON" (page 30). Also, if your AV amplifier (receiver)
has a MPEG decoder function, set "MPEG" to "MPEG" (page 74). Otherwise, no sound or a loud noise will come
from the speakers.
.
B-1
. With the following connections, you
B-2
continued
23