Step 3: Connecting The Mains Lead; Step 4: Preparing The Remote - Sony DVP-SR650P Operating Instructions Manual

Cd/dvd player
Table of Contents

Advertisement

Audio L/R input jacks
A
This connection will use your TV's or audio
component's two speakers for sound.
Connect using the audio/video cable
(supplied).
5.1 ch input jacks and/or
B
digital audio input jack
: Connecting to the 5.1 ch input jacks
B-1
You can enjoy 5.1 ch surround sound using
the internal Dolby Digital*
decoder of this player.
Connect using stereo and monaural audio
cables (not supplied).
*1
Manufactured under license from Dolby
Laboratories.
Dolby, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories.
: Connecting to a digital audio input
B-2
jack
If your audio component has a Dolby Digital,
2
DTS*
, or MPEG audio decoder and a digital
input jack, use this connection.
Connect using a coaxial digital cable (not
supplied).
*2
Manufactured under license under U.S. Patent #:
5,451,942 & other U.S. and worldwide patents
issued & pending. DTS and the Symbol are
registered trademarks and DTS Digital Out and
the DTS logos are trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All
Rights Reserved.
b
For connection
• After you have completed the connection, make
the appropriate settings in Quick Setup (page 14).
If your audio component has an MPEG audio
decoder function, set "MPEG" to "MPEG" in
"AUDIO SETUP" (page 34). Otherwise, no
sound or a loud noise will come from your
speakers.
• The TVS effects of this player cannot be used
with connection
• In order to listen to DTS sound tracks, you must
use connection
output through the AUDIO OUT (5.1CH) jacks,
even if you set "DTS" to "ON" in Quick Setup
(page 14).
• When you connect an audio component that
conforms to the 96 kHz sampling frequency, set
"48kHz/96kHz PCM" in "AUDIO SETUP" to
"96kHz/24bit" (page 34).
12
1
or MPEG audio
B-2
.
B-2
. DTS sound tracks are not
B-2
Step 3: Connecting the
Mains Lead
Plug the player and TV mains lead (power
cord) into a mains.
Step 4: Preparing the
Remote
Insert two R6 (size AA) batteries by matching
the 3 and # ends on the batteries to the
markings inside the compartment. When
using the remote, point it at the remote sensor
on the player.
b
• Do not leave the remote in an extremely hot or
humid place.
• Do not drop any foreign object into the remote
casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light
from the sun or a lighting apparatus. Doing so
may cause a malfunction.
• If you do not use the remote for an extended
period of time, remove the batteries to avoid
possible damage from battery leakage and
corrosion.

Advertisement

Table of Contents
loading

Table of Contents